Holiday Notice: The Spring Festival of 2022 is coming, our "Standard PCB" factory will start the Lunar New Year holiday from January 31st to February 3rd (GMT+8). During the holiday, the website can place orders as usual, please arrange orders in advance. Read more >>



Soldermask bridge

Reason of failed review:

A: The Space between IC pads should be at least 0.2mm if solder mask bridge for green soldermask needed of 1oz/2oz/3oz copper board.

B: Space between IC is smaller than 0.22mm, we can not do solder mask bridge for blue/red/white/yellow/black/matte black solder mask of 1oz/2oz/3oz copper.

C: For 3oz ~10oz copper, if solder mask bridge is needed, IC pad width and IC pad spacing should be ≥ trace width and trace spacing corresponding to copper thickness. For example, for 3oz copper thickness board, trace width/spacing should be ≥ 0.25mm/0.23MM. Then IC pad spacing should be at least 0.23mm, so that  solder mask bridge is available.


A: Modify the space between IC pads to reach our standard.

B: Just do as your file and accept no soldermask bridge between IC pads.


コメント (0)
ここでのメッセージは、上記の内容を補足するものであり、注文などの取引操作を対象としたものではありません。 緊急の質問や注文の問題がある場合は、営業担当者にお問い合わせください。
アップロードできるファイルは合計で1つのみです。 各ファイルは2MBを超えることはできません。 JPG、JPEG、GIF、PNG、BMPをサポート