Digital oscilloscope probe DSS-31
______________________________________________
Purpose:
The DSS-31 oscilloscope is a standalone portable device with a graphic display and microcontroller control, and is designed to study electrical signals in the frequency range from zero to several 1MHz.
The oscilloscope uses Anti-Aliasing technology, which reduces the discrete distortions of the waveform and brings the signal display closer to the typical analog oscilloscopes.
Main technical characteristics:
Maximum sampling rate of 2 MHz for single signals, 20 MHz for periodic signals;
Maximum bandwidth by-3dB level (typical value) 0 ... 5 MHz
Input impedance 1 MΩ, 25 pF;
Sensitivity 10mV, 20mV, 50mV, 0.1V, 0.2V, 0.5V, 1V, 2V, 5V, 10V, 20V / div;
Sweep 0.1 μs, 0.2 μs, 0.5 μs, 1 μs, 2 μs, 5 μs, 10 μs, 20 μs, 50 μs,
0.1ms, 0.2ms, 0.5ms, 1ms, 2ms, 5ms, 10ms, 20ms, 50ms,
0.1s, 0.2s, 0.5 s, 1s, 2c, 5s, 10s / div;
Maximum input voltage 100V (ampl.);
8-bit vertical resolution;
Sweep start modes: automatic, standby, single, manual;
Graphic display monochrome 128x64 pixels;
The number of stored waveforms 2 records of 200 samples;
Interface language is Russian, English;
Off timer 2, 5, 10, 15, 20, 30, 45, 60 min., Off;
LCD backlight adjustable, 6 levels;
Output for tuning the probe with a divider ≈1.22 kHz, (4.5 ÷ 4.75) V (ampl.);
Power supply external (5.0 ± 0.2) V, 100 mA;
Display of measured parameters of a signal with 2 or 4 parameters for choice;
Indication of the frequency of the test a periodic signal of 0.000 Hz ... 9999 kHz (4 bits);
Indication of the launch level of the sweep arrow icon;
Waveform Vertical Offset on the screen ± 9.6 div. (10 mV / div); ± 3.2 div. (20mV ... 10 V / div.); ± 2.4 div. (20 V / div.);
Horizontal offset waveforms on the screen 0.0 ... 10.0 div .;
Automatic function switch sweep and sensitivity limits (separately);
Sound accompaniment of pressing the control buttons (adjustable volume);
Settings menu;
Files:
_________________________________________
Digital oscilloscope probe DSS-31
*PCBWay community is a shared platform and we are not responsible for any design issues.
- Comments(6)
- Likes(18)
- Engineer Mar 19,2024
- Maksim EW7DDR Dec 18,2023
- Engineer Nov 26,2023
- Engineer Aug 15,2023
- Yuriy Efremov Feb 15,2022
- Max Voltage Nov 16,2021
- Engineer Jul 15,2021
- Miguel Angel Eirabella Lopez Mar 01,2021
- Engineer Dec 17,2020
- Ilya Jul 01,2019
- Hysam Rashed Jun 23,2019
- Engineer Jun 18,2019
- Vladimir Jun 05,2019
- Alex Feb 04,2019
- Engineer Feb 02,2019
- Michael Jan 22,2019
- Giorgi Mikashavidzd Jan 14,2019
- Yukhnevich Igor Nov 08,2018
- 18 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
-
1design
-
2usability
-
1creativity
-
10content
-
10design
-
10usability
-
10creativity
-
10content
-
10design
-
10usability
-
10creativity
-
10content
-
10design
-
9usability
-
8creativity
-
5content
-
4design
-
5usability
-
6creativity
-
5content
-
9design
-
7usability
-
8creativity
-
5content
-
6design
-
6usability
-
6creativity
-
6content
-
7design
-
4usability
-
4creativity
-
3content
-
8design
-
7usability
-
7creativity
-
6content
-
4design
-
4usability
-
4creativity
-
1content
-
5design
-
5usability
-
5creativity
-
1content
-
8design
-
7usability
-
7creativity
-
6content
-
9design
-
9usability
-
10creativity
-
9content
-
8design
-
9usability
-
9creativity
-
9content
-
9design
-
8usability
-
9creativity
-
9content
-
9design
-
8usability
-
7creativity
-
6content
-
10design
-
10usability
-
10creativity
-
10content
-
10design
-
10usability
-
10creativity
-
10content
More by Romakin Michael
- 220V 3-step relay voltage regulator 220V 1.5kW 3-step relay voltage regulator without breaking the circuit at the time of switching step...
- Adapter for AVR Fuse Bit Doctor Adapter for AVR Fuse Bit Doctor https://www.pcbway.com/project/shareproject/AVR_Fuse_Bit_Doctor_1.ht...
- PG-872 Dual Channel Square Wave Generator This PCB for a PG-872 Dual Channel Square Wave Generator (generator designed by Leonid Ivanovich Rid...
- AVR Fuse Bit Doctor This version of the fuse bit doctor does not have sockets on the board. All microcontrollers are con...
- Simple DDS generator This is a PCB for simple DDS generator, wich based on development the author under the nickname Inte...
- USB 2.0 microSD/TF card reader USB 2.0 microSD/TF card reader. Based on GL827L SD/MMC/MS Flash Card Reader single chip. All SMD com...
- EMMC test board adapter for Z3X box (first revision) eMMC test board adapter was developed specifically for owners of the Z3X box (for the first revision...
- PCB ver2.1s for self-manufacturing of a soldering station controller for T12 tips. PCB ver2.1s for self-manufacturing of a soldering station controller for T12 tips.
- DIY clone Arduino Uno PCB A redesigned Arduino UNO clone PCB takes into consideration using some alternative components like (...
- p-n junction tester PCB for p-n junction tester. More information here https://www.radiokot.ru/konkursCatDay2017/48/
- SG-642 sine wave generator This PCB for a sine wave generator SG-642 (generator designed by Leonid Ivanovich Ridiko). The board...
- Digital oscilloscope probe DSS-31 ______________________________________________Purpose:The DSS-31 oscilloscope is a standalone portab...
- USB 2.0 microSD/TF card reader with micro USB B 5-pin USB 2.0 microSD/TF card reader with micro USB B 5-pin connector. Based on GL827L SD/MMC/MS Flash Car...
- Temperature control board ### DESCRIPTIONThis device is designed то replacing the original control board in a low cost yogurt ...
-
IoT Indoor system with ESP32 to monitor Temperature, Humidity, Pressure, and Air Quality
337 0 2 -
Naruto Multi-color PCB printed with UV technology
134 2 1 -
-
-
-
-