OpenSP - an Open Source hingeless Game Boy SP Design
NOTE: Most recently updated 21/07/2023
Changes include: - Funnyplaying V3 IPS compatibility changes - Revised trigger surrounds for accessory compatibility - Thicker front piece to assist with headphone variants - Screen should sit more flush to the console with less pressure - Many minor design changes and quality of life changes
OpenSP is a take on the Gameboy Advance SP which forgoes the hinge to make a flat console more akin to the Gameboys that came before it.
With this kit you can use an original SP shell, and either original SP buttons, or Gameboy Color buttons if you prefer.
Whichever version you choose to print, you MUST print the corresponding brightness button. The small amount of additional depth compared to an OEM top shell means that the OEM brightness button is incompatible.
Things you'll need:
- A Gameboy Advance SP
- A 3D printer, a good friend with a printer, or a service like PCBway
- IPS Display (I recommend the Funnyplaying IPS Display, available here: www.retromodding.com/products/game-boy-advance-sp-ips-lcd )
- 3M double sided tape to attach the screen - this comes free with most IPS display purchases in my experience
If you opt for the GBC version, use GBC or GBP silicone membranes, and add a small amount of material under the conductive pads - I use the screw hole covers from the top screen of the SP - this will stop the 'double-click' effect you may feel when pressing due to the silicone membrane press followed by the tactile switch press.
If you make one, make sure to let me know on Instagram (@josephtomkins)
This project wouldn't have been possible without Jordan (@retrogaming_dad) and Jonas (@retrogame.evo) who continuously helped with testing, improvement suggestions and the photos you see on this page. If you don't already follow them, they're both amazing people in the Gameboy community and you should!
Files are shared under public domain - meaning that you are free to edit, redistribute and share these files, it would be really nice if you shared any changes that you made publicly too (but there's no obligation!)
I am not responsible for any damage caused to your console in the process of building this mod, any changes or alterations are made entirely at your own risk.
OpenSP - an Open Source hingeless Game Boy SP Design
*PCBWay community is a shared platform and we are not responsible for any design issues.
- Comments(0)
- Likes(5)
- Engineer Oct 31,2023
- Theodore Killmeyer Aug 06,2023
- Engineer Aug 03,2023
- carlo GG_CUSTOMS_ Aug 03,2023
- Guang Ning Aug 02,2023
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Joseph Tomkins
- Gameboy POCO Laminated GBC display shell POCO is a concept combining the Gameboy Pocket and Gameboy Color, and is popular among the community...
- Game Boy Pocket AA battery rear shell Here are my AA compatible game boy pocket rear shell designs, other versions (AAA and Sealed USB C) ...
- GachaSP Original (Miniature Gameboy Advance SP) The Smallest Gameboy Advance SP in the world!The speaker compatible version of this is available her...
- GachaSP Buttons Sometimes the GachaSP buttons can be difficult to press depending on the quality of the 3D print. Th...
- GachaSP (Final Revision) The Smallest Gameboy Advance SP in the world!Use of these files is restricted under creative-commons...
- Lensless Gameboy Pocket / Pocket Color Shell Get rid of the lens and vibe in the 90's goodness of completely transparent tech. This shell holds a...
- GachaSP with Speaker Original - Miniature SP console Note: It is better to order the Final Revision which will avoid some wall thickness issues:https://w...
- OpenSP - an Open Source hingeless Game Boy SP Design NOTE: Most recently updated 21/07/2023 Changes include: - Funnyplaying V3 IPS compatibility changes ...
-
Creative Micro Designs Inc. CMD FD-2000 / FD-4000 3D Printable Case
92 0 0 -
Creative Micro Designs Inc. CMD FD-2000 / FD-4000 Metal Case
115 0 0 -
-
-
IoT Indoor system with ESP32 to monitor Temperature, Humidity, Pressure, and Air Quality
674 0 3 -
Naruto Multi-color PCB printed with UV technology
232 2 1 -
-