Astro's Electronics Lab
AUSTRALIA • + Follow
Edit Project
Description
Discrete 24V Single Supply Stereo Preamplifier Input Indicator
The LEDs mount on the top side passing through the front panel work, and the JST connector for the cable interconnect to the preamplifier mounts on the bottom side.
This goes with the preamplifier:
Schematic and Layout
Schematic
Mar 19,2024
167 views
Discrete 24V Single Supply Stereo Preamplifier Input Indicator
2 Layers PCB 23 x 31.4 mm FR-4, 1.6 mm, 1, HASL with lead, Blue Solder Mask, White silkscreen
Discrete stereo preamplifier input selector indicator
167
0
0
Published: Mar 19,2024
BOM(Bill of materials)
Purchase
Donation Received ($)
PCBWay Donate 10% cost To Author
Only PCB
PCB+Assembly
*PCBWay community is a shared platform and we are not responsible for any design issues.
Copy this HTML into your page to embed a link to order this shared project
Copy
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
Remove
It looks like you have not written anything. Please add a comment and try again.
View More
View More
VOTING
0 votes
- 0 USER VOTES
0.00
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Design
1/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Usability
2/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Creativity
3/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Content
4/4
More by Astro's Electronics Lab
- Headphone Adaptor for Power Amplifiers Add a headphone socket to any existing stereo amplifier that doesn't have one. This L-pad attenuator...
- Soft-Start Circuit for Toroidal Transformers WARNING: This project is connected to mains line voltage during its entire operation. This project s...
- AEL-50B Simple 50W Power Amplifier Need a simple power amplifier to drive a loudspeaker that doesn't require any messy set-ups to get g...
- +/-15V & +12V Regulated Power Supply This project allows you to have a +/-15V rail for a preamp and a +12V rail for powering some relays,...
- Amplifier Power Supply & DC Protection This unit will power two power amplifier modules up to 3A using a 300VA toroidal transformer. It wil...
- Dual-State Indicator This simple circuit is based around an astable multivibrator which is used to indicate two states fo...
- Discrete 24V Single Supply Stereo Preamplifier Input Indicator The LEDs mount on the top side passing through the front panel work, and the JST connector for the c...
- Discrete 24V Single Supply Stereo Preamplifier Simple discrete (3-transistor) stereo preamplifier with bass, treble, balance and volume. Also inclu...
- 0-15V Dual Channel Lab Power Supply Front Panel Front panel for the project to suit a Jaycar enclosure https://www.jaycar.com.au/pro-quality-instrum...
- ETI-480/AEL-480 50W Power Amplifier Module In March, 1977, ETI published a very popular project called the "ETI-480", with two versions offered...
- Mains Transformer Switched Adapter I hate wiring mains transformers to terminal blocks in order to connect a power switch and fuse in s...
- 0-15V 0.60mA-5A Adjustable Lab Power Supply Build two of these modules for a dual supply!There is a mis-print on the silkscreen for the bridge r...
- Mini 700mW Power Amplifier This little amplifier will deliver 700mW before clipping in to an 8 ohm load.Link to my YouTube vide...
- 1 Watt "Champ" Utility Amplifier Need a small utility amplifier to drive a speaker? This is the amp! Coined the "Champ", was original...
- AEL-480 Amplifier Power Supply & Muting Back in March, 1977, Electronics Today International (ETI) released a project called ETI-480. This w...
You may also like
-
Creative Micro Designs Inc. CMD FD-2000 / FD-4000 3D Printable Case
92 0 0 -
Creative Micro Designs Inc. CMD FD-2000 / FD-4000 Metal Case
114 0 0 -
-
-
IoT Indoor system with ESP32 to monitor Temperature, Humidity, Pressure, and Air Quality
672 0 3 -
Naruto Multi-color PCB printed with UV technology
232 2 1 -
-