Product Description
Touch Sensor Module
Features:
- Initial state is low level, touch is high level, and no touch is low level (similar to touch button function)
- Low power consumption
- The power supply can be 2~5.5V DC
- Both sides can be used as touch surfaces, which can replace the traditional touch buttons
- 4 M2 screw positioning holes for easy installation
Control interface: there are 3 pins (GND, VCC and SIG), wherein GND is ground, VCC is power supply, and SIG is digital signal output pin;
Power indicator: green LED, which will light up when it is powered on correctly;
Touch area: the inner area of an icon similar to a fingerprint, which can be triggered by touching it lightly with a finger.
Positioning holes: 4 M2 screw positioning holes with an aperture of 2.2mm, which make the modules easy to install and position and realize the combination between modules.
- Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-
PCBWay MPU-6050 Module 6DOF Three-Axis Accelerometer Gyroscope Module GY-521$1.99 or 240 BeansRedeem Now
-
-
-
-
-
-
-
Sound sensor module (voice control switch, audio detection/analog + digital)$6.00 or 720 BeansRedeem Now
-
-50%BME280/5V Atmospheric Pressure Sensor Temperature Humidity Sensor Breakout Board$5.99 or 800 BeansRedeem Now
-
-
-
-
-
-