Grayscale Module For Smart Robot Car
Description
This grayscale module is equipped with a white LED heat sink and a photoresistor. After the LED is light on, it is always bright and reflected by the reflective surface. The photoresistor can sense the reaction intensity and output different voltages. The gradation change of the reflecting surface can be analyzed by the voltage signal. According to this principle, the module can realize simple color recognition, and it has three pins VCC, GND, IO interface. You can connect this module to various smart cars or development boards (Arduino/STM32) by cable or DuPont line.
Detail
Working voltage: 3.3V~5V
Working current:<20mA
Working temperature: -10 ° C ~ +70 ° C
Detection resolution: 10%
Interface type: Analog signal
Process: Soldering / Patching
Size: 27*27mm
Weight: 3g
Note: In order to ensure the accuracy of the measurement, the LED light on the grayscale module is about 5mm away from the ground.
- Comments(0)
You might like
-
-
-
Sensor Expansion Board With PH2.0 Port for World of Module(Micro:bit)$8.99 or 1080 BeansRedeem Now
-
-
-
-
Micro:bit expansion board motor steering gear development drive board$19.99 or 2240 BeansRedeem Now
-
Jetbot Mini AI Vision Robot Car ROS Starter Kit(with NVIDIA Jetson Nano 4GB)$299.99 or 36000 BeansRedeem Now
-
-
-
-
-
16 in 1 Building:bit Super kit(Including the Microbit V2 mainboard)$89.99 or 10800 BeansRedeem Now
-
-
-