Benjie Jiao
PHILIPPINES, THE • + Follow
Edit Project
Components
|
2.2nF Capacitor |
x 1 | |
|
1uF Capacitor |
x 2 | |
|
100uF Capacitor |
x 2 | |
|
100nF Capacitor |
x 3 | |
|
1n4148 |
x 2 | |
|
5mm LED |
x 1 | |
|
10K NTC Thermistor |
x 4 | |
|
B100K Potentiometer (RV09) |
x 3 | |
|
1K Multi-turn Trimmer Pot |
x 1 | |
|
100K Resistor |
x 8 | |
|
1M Resistor |
x 2 | |
|
1K5 Resistor |
x 1 | |
|
200K Resistor |
x 1 | |
|
33K Resistor |
x 1 | |
|
20K Resistor |
x 1 | |
|
10K Resistor |
x 3 | |
|
TL074 |
x 1 | |
|
CD40106 |
x 1 | |
|
3.5mm Audio Jack |
x 4 |
Tools, APP Software Used etc.
|
KiCADKicad
|
Description
MiniOSC - A voltage controlled oscillator for modular synthesizer
MiniOSC
https://github.com/benjiaomodular/MiniOSC
This is a basic schmitt-trigger inverter based oscillator module with saw and pulse outputs.
Versions
rev 1.1
- Issue with mounting holes was fixed.
- Label sizes increased a bit.
rev 1.0
- Initial release.
- Mounting holes were too small for M3 screws, fixed by drilling them out.
Schematic and Layout
Dec 03,2021
2,561 views
MiniOSC - A voltage controlled oscillator for modular synthesizer
A voltage controled oscillator for Eurorack form factor modular synthesizer.
2561
2
2
10.00 (1)
Published: Dec 03,2021
Download Gerber file 50
Purchase
Donation Received ($)
PCBWay Donate 10% cost To Author
*PCBWay community is a shared platform and we are not responsible for any design issues.
Copy this HTML into your page to embed a link to order this shared project
Copy
Under the
Attribution-MIT
License.
- Comments(2)
- Likes(2)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
Remove
It looks like you have not written anything. Please add a comment and try again.
View More
VOTING
1 votes
- 1 USER VOTES
10.00
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Design
1/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Usability
2/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Creativity
3/4
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
Content
4/4
-
10design
-
10usability
-
10creativity
-
10content
10.00
More by Benjie Jiao
- EuroPowerBoard v2 This is a busboard for Eurorack synths but with a modification for my own builds.I use 4-pin JST con...
- EuroPowerBoard This is a power distribution board I use for my Eurorack synthesizer cases. It uses 10-pin IDC conne...
- (2 of 2) MiniLFO v1.1 - Main Panel A super simple 2HP triangle wave LFO for Eurorack modular synth.You can find more info on my website...
- (1 of 2) MiniLFO v1.1 - Front Panel MiniLFOA super simple 2HP triangle wave LFO for Eurorack modular synth.You can find more info on my ...
- SOT2DIP Adapter A simple SOT-23-6 to DIP-6 adapter for breadboarding with SMT components. In 8x8 panels.Use this wit...
- (2 of 2) MiniVerb v1.1 - Main Panel MiniVerb v1.1 - Main PanelThis is the front panel for my Daisy Seed-based Reverb. You can print this...
- (1 of 2) MiniVerb v1.1 - Front Panel MiniVerb v1.1 - Front PanelThis is the front panel for my Daisy Seed-based Reverb. You can print thi...
- (2 of 2) MiniDelay v1.0 - Main Board A three-knob delay module based on Rene Schmitz' PT2399 delay design. It’s a simple setup with input...
- (1 of 2) MiniDelay v1.0 - Front Panel A three-knob delay module based on Rene Schmitz' PT2399 delay design. It’s a simple setup with input...
- SynthCard: A business-card sized synthesizer module # SynthCardThis is my business card synth for benjiaomodular.com. It is a working oscillator circuit...
- euro2breadboard A simple utility module for connection Eurorack powers supply on to a breadboard for synthesizer dev...
- MiniVCF v1.1 - A 4HP Voltage Controlled Filter using a diode ladder design for Eurorack modular synth (Part 3/3: Main) NOTE: This module is part of a three board design. Make sure to print all three PCBs!This build is m...
- MiniVCF v1.1 - A 4HP Voltage Controlled Filter using a diode ladder design for Eurorack modular synth (Part 2/3: Control) NOTE: This module is part of a three board design. Make sure to print all three PCBs!This build is m...
- MiniVCF v1.1 - A 4HP Voltage Controlled Filter using a diode ladder design for Eurorack modular synth (Part 1/3: Front) NOTE: This module is part of a three board design. Make sure to print all three PCBs!This build is m...
- MiniADSR v1.0.1 - A four parameter envelope generator for Eurorack modular synth (Part 3/3 - Main Board) This is my take on René Schmitz' Fastest Envelope in the West. It’s a four parameter envelope genera...
- MiniADSR v1.0.1 - A four parameter envelope generator for Eurorack modular synth (Part 2/3 - Control Board) This is my take on René Schmitz' Fastest Envelope in the West. It’s a four parameter envelope genera...
- MiniADSR v1.0.1 - A four parameter envelope generator for Eurorack modular synth (Part 1/3 - Front Panel) This is my take on René Schmitz' Fastest Envelope in the West. It’s a four parameter envelope genera...
- MiniMult - A simple 2HP passive multiples module for Eurorack modular synthesizers (Part 2/2) This is a basic utility module. Passive multiples are essentially just a bunch of audio jacks connec...
You may also like
-
IoT Indoor system with ESP32 to monitor Temperature, Humidity, Pressure, and Air Quality
337 0 2 -
Naruto Multi-color PCB printed with UV technology
134 2 1 -
-
-
-
-