2.1 Amplifier Transistor-based 2SC5200-2SA1943
This is my DIY project try make 2.1 amplifier that have 3 channel output there is Subwoofer Out, Front left out and Front right out.
The output stage uses transistor pair of 2SC5200 and 2SA1943 in a class AB amplifier, it can give power about 85W before clipp @4 ohm load / channel or about 256W total power.
This amplifier has some feature like : midbass control, treble controll, and volume controll for the stereo front channel, and a separated volume controll for the subwoofer channel.
The preamp power supply powered from the main amplifier that regulated with 12 volt ic-based regulator like L7812 and L7912 to make constant voltage.
This amplifier need 24-0-24/10A symmetrical transformer
what does it sounds like? please check the video on barlex respectaizer youtube channel
2.1 Amplifier Transistor-based 2SC5200-2SA1943
*PCBWay community is a shared platform and we are not responsible for any design issues.
- Comments(2)
- Likes(2)
- 5 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
-
1design
-
2usability
-
3creativity
-
4content
-
10design
-
10usability
-
10creativity
-
10content
-
10design
-
10usability
-
10creativity
-
10content
-
10design
-
10usability
-
10creativity
-
10content
-
10design
-
10usability
-
10creativity
-
10content
More by barita
- Simple audio limiter This limiter circuit use to avoid clips on a mid-power amp.It controll and decrease the input of amp...
- TIP 41/42 Mini Amplifier SMD The project uses TIP41/42 as the final amplifier, the circuit is made as simple as possible with SMD...
- STEREO LM4766 AMPLIFIER Stereo amp using the Gainclone LM4766 chip which has a great power output about 2x40 watts.The PCB t...
- STEREO AMPLIFIER TPA3255 CLASS D Simple powerfull class D amplifier using TPA3255 chip.This amplifier can produces power up to 2x315W...
- Digital active cross over 2.1 This is a simple 2.1 digital active cross over using PT2353H chip.This active cross over have some m...
- Stereo TDA7266 Mini Amplifier This TDA7266 Chip Amplifier can produce 14Watt Stereo power (2x7Watt) with a single supply 12V
- STK4152 AMPLIFIER Without Tone This board for STK4152II Stereo amplifier. You can also use the other STK41X2 Chip with this board, ...
- Stereo TDA7377 Amplifier TDA7377 Sereo Standart
- Stereo class T Amplifier Class T amplifiers are known for their good sound and high efficiency.The chip I use is TA2020-020 w...
- 5.1 Amplifier using TDA7297 In this project I made a 5.1 amp to be connected to a PC soundcard, later it can be used to watch or...
- uPC1188h Stereo Amplifier In this project I make stereo amplifier 2x20Watt using uPC1188h chip amp.This chip is usually used i...
- 2 Axis Laser CNC Shield This cnc shield for use with arduino uno and motor driver A4988
- Simple mixer for home recording In this project I make a very simple mixer for home recording.You can use this mini mixer for record...
- LA4628 Stereo amplifier This LA4628 chip amp produce a good timbre, clear detail, and natural sound.The components are easy ...
- Karaoke Tone controll V2 In this project I want to make the latest version of the tone control for karaoke, namely karaoke to...
- TA8231L STEREO AMPLIFIER This amp has a simple design but can still be used with audio grade components.Use the potentiometer...
- 2.1 Amplifier TEA2025 This 2.1 amplifier uses TEA2025, one of the cheapest IC chips that is easily available on the market...
- Simple Symmetrical Power Supply General Purposes Symmetrical power supply with 8 Pcs electrolytic capacitor
-
IoT Indoor system with ESP32 to monitor Temperature, Humidity, Pressure, and Air Quality
338 0 2 -
Naruto Multi-color PCB printed with UV technology
135 2 1 -
-
-
-
-