I just received my first PCB from PCBWay. What is the allowed manufacturing error in centering the solder mask with the pads? I have enclosed a view of a VSSOP (pads 0.3mm x 0.8mm) IC on that board and the offset between the pad centre and the mask opening centre is just under 0.09mm. This results in an overlap of the pad of about 16%. I don't expect any problems in assembly, but for future work I need to know how big this offset can be before the board would be rejected by PCBWay.
Ranking | Name | Answers |
---|---|---|
1 | PCBWay Team | 9 |
2 | Xiaoyang Ma | 1 |
3 | Engineer | 1 |
4 | Christian Davies | 1 |