DTECH USB to RS422 RS485 Serial Port Adapter Cable(0.5m)
Product parameter
- Brand: DTECH
- Product name: USB to RS485/422 conversion line
- Type number: DT-5019 series
- Compatibility: RS422/RS485 standard
- Working mode: asynchronous differential transmission (full half duplex)
- Transmission rate: 300-460800bps
- Operating environment:-20 C-70 C, relative humidity 5%-95%
- Environmental protection level: lightning surge protection of RS485 interface at 600W per line
- Transmission medium: twisted pair (wire diameter 20.5MM) or shielded wire
- Signal indication: red lamp power supply, green lamp sends signal, yellow lamp receives signal
- Transmission distance: 1200m from RS422/485, and no more than 5m from USB cable
USB to RS485/RS422 converter It easily lets you connect RS485 or RS422 device directly to your Laptop PC computer USB port
Ideal for industrial environment -provides 600w surge protection and 15KV ESD isolated protection on signal pins to protect costly and often sensitive control equipment against electrical damage
With high performance quality processor chip (FTDI-chipset FT232) and I/O auto conversion circuitry which makes RS 485 to USB convertor one of the most reliable dongle on the market
4ft USB serial RS-485 RS-422 adapter cable supports windows 10 8 7, Mac and more; plug-and-play, No power supply needed.
There are no IRQ and COM port conflicts, since the port do not require any additional IRQ, DMA, memory as resources on the system; RS485 for Half duplex and RS422 for Full duplex communication
- Comments(0)
You might like
-
-
European Standard Adapter Power Conversion Plug（Supports a maximum power of 300W）$0.50 or 60 BeansRedeem Now -
-
-
-
-
-
-
-
Industrial USB TO TTL Converter, Original FT232RNL, Multi Protection & Systems Support$6.99 or 840 BeansRedeem Now -
-
-
-
-
3.3V 5V Serial Adapter Module CH340G USB TTL UART Arduino Pro Mini Bridge$2.00 or 240 BeansRedeem Now -
-50%
-
-
DTECH USB to RS422 RS485 Serial Port Adapter Cable(0.5m)
Out of stock
