|
ESP32-CAM |
x 1 | |
|
2.54MM male and female headers |
x 3 | |
|
Mini USB Socket XM7D-0512 |
x 1 | |
|
optional 5mm screw terminal |
x 1 | |
|
optional 5v stepdown buck converter |
x 1 | |
|
optional 100uf electrolytic capacitor |
x 1 |
ESP32-CAM Adaptor PCB
This is an adaptor PCB for the ESP32-CAM. The ESP32-CAM does not come with USB and requires a FTDI adaptor to program it. Normally this requires a bunch of Dupont cables and poking around. This PCB makes flashing the ESP32-CAM plug and play. A header is provided to put the device into flash mode while another header lets you choose if you want to flash at 3.3v or 5v. (ensure your FTDI adaptor is set to the same before plug in). The ESP32-CAM can be powered by the onboard Mini USB (chosen as it is a through hole variety and easier to solder) or a via a screw terminal and 5v step down buck converter. This will allow powering the device at much higher voltage levels.
ESP32-CAM Adaptor PCB
*PCBWay community is a shared platform and we are not responsible for any design issues.
- Comments(1)
- Likes(3)
- Engineer Mar 23,2024
- blockofdynamite Jul 20,2023
- Engineer Jun 19,2023
- 0 USER VOTES
- YOUR VOTE 0.00 0.00
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
More by Gary Watts
-
(DIY) COMMODORE 64 DEAD-TEST (781220) DIAGNOSTIC CARTRIDGE
56 0 0 -
Creative Micro Designs Inc. CMD FD-2000 / FD-4000 3D Printable Case
208 0 0 -
Creative Micro Designs Inc. CMD FD-2000 / FD-4000 Metal Case
274 0 0 -
-
-
IoT Indoor system with ESP32 to monitor Temperature, Humidity, Pressure, and Air Quality
751 0 3 -
Naruto Multi-color PCB printed with UV technology
267 2 1