1. Blog>
  2. How to Place a SMD-Stencil Order at PCBWay| PCBWay Website Exploration 03

How to Place a SMD-Stencil Order at PCBWay| PCBWay Website Exploration 03

by: Nov 18,2022 3713 Views 0 Comments Posted in Help Center


Welcome back to the PCBWay website exploration. In surface mount assembly, the stencil is an essential tool to ensure that the appropriate amount of solder paste is on the right pads. In this video, we will introduce how to order a stencil for your PCB project.

On the PCBWay website, there are two options for you to place a stencil order. You can either order a stencil combined with the PCB or just a stencil by itself.


Stencils ordered together with PCBs

Prototype PCB - Online PCB Quote - Full feature custom PCB prototype service at low cost - PCBWay

In the PCB quote page, you need first set all the parameters for PCB and then check the “SMD-Stencil” at the bottom to connect the orders. Next, select the parameters of the stencil you required. You can choose a framework or non-framework stencil that best fits your need. The framework stencil is for automated solder paste printing machines and there are several standard sizes to be chosen. Non-framework stencils are typically used for hand soldering, and you can also customize the stencil sizes and select other parameters according to your requirements. When you put the mouse on the green question mark, you can get a detailed explanation of related parameters. If you have any special requests about the stencil, you can also write them down in the blank. After setting all the parameters, you need to upload the Gerber file and proceed with payment after review.

When ordering stencils together with PCBs, there is one additional point to be noted. If the connected PCB for a stencil is panelized, then the working file of the stencil will be panelized accordingly. But if you don't want the stencil to be panelized, you should then submit a separate stencil order.


Stencils Ordered Separately

PCB Stencil - Online PCB Quote - Full feature custom PCB prototype service at low cost - PCBWay

If you only need a stencil, there is a separate “SMD-Stencil” quote page. As usual, you need to set all the parameters for the stencil. Once completed, you should then upload the related Gerber file for stencil production.

If you want to place a stencil for an existing PCB order at PCBWay, you can directly select the PCB order number and don’t need to upload the Gerber file additionally. PCBWay will use its PCB production file for stencil production.

                                                   

If there is anything else about stencil ordering that you’d like to know, don’t hesitate to leave your comments below. 

 

Join us
Wanna be a dedicated PCBWay writer? We definately look forward to having you with us.
  • Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
    Back to top