● Free of constituents such as halogen, antimony, red phosphorous, ect. No toxic gas emission and no hazardous residue during waste combustion.
● Excellent mechanical processability and thermal resistance, lead free process compliance
● Smartphone, tablet, notebook
● LED, game station
● Automotive electronics
● Communication equipment
Product Performance
Items | Method | Condition | Unit | Typical Value | |
Tg | IPC-TM-650 2.4.25 | DSC | ℃ | 155 | |
Td | IPC-TM-650 2.4.24.6 | 5% wt. loss | ℃ | 355 | |
CTE (Z-axis) | IPC-TM-650 2.4.24 | Before Tg | ppm/℃ | 40 | |
After Tg | ppm/℃ | 230 | |||
50-260℃ | % | 2.8 | |||
T260 | IPC-TM-650 2.4.24.1 | TMA | min | 60 | |
T288 | IPC-TM-650 2.4.24.1 | TMA | min | 45 | |
Thermal Stress | IPC-TM-650 2.4.13.1 | 288℃, solder dip | -- | >100S No Delamination | |
Volume Resistivity | IPC-TM-650 2.5.17.1 | After moisture resistance | MΩ.cm | 1.15E + 08 | |
E-24/125 | MΩ.cm | 4.13E + 08 | |||
Surface Resistivity | IPC-TM-650 2.5.17.1 | After moisture resistance | MΩ | 9.61E + 06 | |
E-24/125 | MΩ | 5.37E + 07 | |||
Arc Resistance | IPC-TM-650 2.5.1 | D-48/50+D-4/23 | s | 178 | |
Dielectric Breakdown | IPC-TM-650 2.5.6 | D-48/50+D-4/23 | kV | 45+kV NB | |
Dissipation Constant (Dk) | IPC-TM-650 2.5.5.9 | 1GHz | -- | 4.5 | |
IPC-TM-650 2.5.5.9 | 1MHz | -- | 4.8 | ||
Dissipation Factor (Df) | IPC-TM-650 2.5.5.9 | 1GHz | -- | 0.011 | |
IPC-TM-650 2.5.5.9 | 1MHz | -- | 0.009 | ||
Peel Strength (1Oz HTE copper foil) | IPC-TM-650 2.4.8 | A | N/mm | — | |
After thermal Stress 288℃,10s | N/mm | 1.5 | |||
125℃ | N/mm | — | |||
Flexural Strength | LW | IPC-TM-650 2.4.4 | A | MPa | 630 |
CW | IPC-TM-650 2.4.4 | A | MPa | 480 | |
Water Absorption | IPC-TM-650 2.6.2.1 | E-1/105+D-24/23 | % | 0.10 | |
Flammability | UL94 | C-48/23/50 | Rating | V-0 | |
E-24/125 | Rating | V-0 |
1. Specification sheet: IPC-4101/128, is for your reference only.
2. All the typical value is based on the 1.6mm specimen, while the Tg is for specimen≥0.50mm.
3.All the typical values listed above are for your reference only and not intended for specification. Please contact Shengyi Technology Co., Ltd. for detailed information. All rights from this data sheet are reserved by Shengyi Technology Co., Ltd.
Explanation: C=Humidity conditioning, D=Immersion conditioning in distilled water, E=Temperature conditioning
The first digit following the letter indicates the duration of preconditioning in hours, the second digit the preconditioning temperature in ℃ and the third digit the relative humidity.
Product Certificate
S1150G CQC.pdf
S1150G CQC CN 苏州.pdf
BSI VC 660215(2016).pdf
S1150G TDS
S1150G Line up
S1150G Processing guidelines
S1150G Laminate SGS
S1150G Prepreg SGS
S1150G Laminate MSDS
S1150G Prepreg MSDS